Engadget Logo The Engadget Japanese version of the water pressure can be visualized and adjusted to the appropriate pressure. High pressure, small, lightweight household cleaning machine F1

A high-voltage, miniaturized and lightweight household cleaning machine is on the stage!

The weight of the body is only 5.2 kg. Compared with other products, the weight is about 2 to 5. Light and easy to carry! Compared with traditional products, the size is 34x17x25 cm, and the size can be up to 1 inch 3. Even a small space can be taken in!

The maximum discharge power is 10000kPa, which achieves about 40 times the water pressure of tap water! Car washing, exterior walls, porches, screen doors, windows, parking lots, bathrooms, balconies, walls. Adjust the pressure and mode according to different places, even if you don't make a lot of effort, you can become beautiful in a short time.

It can also be used in untouchable parts and the interior of pipes, showing stubborn stains and outstanding strength by increasing water pressure. Easily remove dirt, greatly reducing time and energy.

"visualize invisible stress

When cleaning, if the actual water pressure cannot be confirmed, it may cause damage or damage to the materials in the cleaning place. The "F1" fuselage saves space and has a built-in ultra-small pressure sensor. Air and liquid pressures are converted into electrical signals by pressure sensors to visualize invisible pressures.

The water pressure is clear at a glance. According to the scene to be cleaned, you can adjust to the appropriate pressure. From stubborn stains to flexible materials such as wood, unharmed and finished cleanly.

Compared with other products in which water pressure can only be judged by the flow rate of water flowing inside the hose, "F1" can also be said to be a leading product in the high-pressure cleaning machine industry.

Strong hydraulic pressure and high performance

The maximum discharge capacity of "F1" is 10000kPa, and the water pressure is about 40 times that of tap water. Apply strong pressure to the water and spray vigorously, which can not only improve the efficiency of dirt removal, but also wash away the dirt stuck on the exterior walls and screen doors, the mud and moss around the porch, and so on.

"it is easier to clean and deal with a wider range of scenarios."

With this in mind, the F1 development engineer designed a long nozzle. By turning the nozzle, the injection mode can be adjusted steplessly from the fan to the fan. Put washing powder, softener and bleach into a special bottle for accessories to remove stubborn dirt such as oil.

Straight line injection

The strong pressure makes the water concentrate on one point, achieving very high power, so it can clean the dirt that enters the concave and convex and the dirt accumulated all the year round can also bounce off.

Fan injection

By turning the nozzle, the injection mode changes from a straight line to a fan. The scope of cleaning is also expanded from small points to large noodles, and small stains can also be thoroughly cleaned, which is very suitable for watering flower beds.

Foam spray

Install the special bottle directly on the trigger gun, hold the lever of the gun, you can automatically absorb the detergent in the bottle to dilute it, and spray the detergent into foam in one breath. Take into account the improvement of work efficiency and cleaning power.

In winter, you can also use snow-melting agent to rinse.

Tap water connection type

The developers of "F1" conducted market research and designed two kinds of one-button joints: handle type and screw type. This allows you to connect to most of the taps on the market.

In the case of "hose belt", it is often troublesome to prepare a screwdriver when removing the hose from the faucet. F1 does not need a screwdriver, just turn the ring of the joint to remove the hose hose.

Tighten the faucet tightly with rings or screws so that you don't have to worry about falling off during use.

Self-priming type

In the case of insufficient length of the hose far away from tap water, the "self-priming function" of absorbing water to the pump in a short period of time can be used. Rain Water and other stagnant water can be used instead of tap water for high-pressure cleaning.

In addition, the self-priming filter has a high-density structure, which can prevent the mixing of garbage and sand floating in the stagnant water. The 1300W motor will operate stably and there is no need to worry about the weakening of water pressure. Please clean the dirt on the filter after use.

When it comes to high-pressure cleaners, it is easy to think that a large amount of water is used because of spraying water, but there is no change in the amount of water flowing in the usual tap water hose. Because of the strong water pressure, even a small amount of water can effectively remove dirt compared with manual work through straight-line injection, fan-shaped injection and other modes.

Because the time of running water will also be shorter, so if it is compared with the same range of cleaning, the amount of water will be saved by 2% and 3%, which is quite small. It can be said that this has also made a small contribution to the current situation of water shortage in the world. Moreover, without the use of cleaning agents, dirt can be removed by water pressure and water flow, and it is also very friendly to the environment.

High strength and durability

Light weight and compact

The body weight of "F1" is only 5.2 kg, which is about 3x5 less than other products. It is light and easy to carry, and it is also easy for women and older people to carry.

Compared with traditional products, the size is 34x17x25 cm, and the size can be up to 1 inch 3. Because of its compactness, even a very small space can be taken in.

"F1" adopts industrial direct winding motor. The characteristic of DC motor is that the speed changes greatly with the change of load. Greater torque will be generated when starting or at low speed. When the load is reduced, the speed is faster and the running efficiency is greatly improved.

Therefore, compared with induction motors of the same size, "F1" stands out in terms of output and speed. The performance of maximum displacement 420L/H and common displacement 350L/H in refineries has also attracted much attention.

The spill of "F1" is made of metal, so it is more durable. There are two handheld handles on the upper part of the fuselage, which are easy to carry. The lower part is also equipped with anti-skid function. It can also prevent direct contact with the ground and improve wear resistance. Moreover, all of them are integrated ontology design, and the receptivity is also very good. Even a small space can be taken in.

The "F1" trigger gun has a built-in small switch. Holding the lever of the gun, the motor will rotate and spray water. When released, the motor will also stop at the same time, so it will not consume useless electricity. Hold the lever to drain the water for about 15 seconds, and the exhaust of the hose, body and gun is necessary.

"4 security features

Security warranty period and after-sales service

F1 offers an one-year warranty. After-sales service is also foolproof.

Nishin Trading Co., Ltd. is a formal import agency company with domestic business as the center, hoping to send brand-new and functional beautiful goods to everyone here. The company cooperates with many professionals and manufacturers to carry out import and export business in a wide range of fields, such as clothing, health products, beauty appliances, art crafts and so on.

With regard to the household high-pressure cleaning machine "F1" published in "GREEN FUNDING" this time, commodity guarantee and after-sale care after purchase will also be foolproof. I hope you can get support. In addition, if you have any comments and suggestions on the product, please feel free to contact us.

Twitter:https://twitter.com/home?lang=zh

E-mail:gr@15jp.cn

I sincerely look forward to your support.

Q: please tell me the precautions when using the high-pressure cleaning machine "F1".

A: the damage caused by water pressure can also be considered when the object is on a weak surface and in an old situation, so it is recommended to observe the situation from a distance.

In addition, you will be injured when you come into contact with high-pressure water coming out of the front of the nozzle, so please be careful not to touch it.

Q: can water in rivers and lakes be used?

A: the water in rivers and lakes may be mixed with sand that is difficult to remove by filters. Please do not use it because it may damage the material.

Q: what are the common reasons for the failure of high-pressure cleaning machine?

A: a motor imprint caused by a long period of idling.

Using the self-priming function, when absorbing stagnant water, the water can not be sucked up well, and the idling state often occurs. Please be careful when using it.

Q: I don't know how to use detergent.

A: the fuselage comes with a bottle for cleaning agent. Please put the washing powder at the bottom of the bottle.

Please use neutral detergent because of the risk of damaging the body.

Q: why does water spray irregularly?

A: please make sure there is any sand in the sprayed water, hose, etc.

Q: can pollen, yellow sand and smoke be cleaned and cleaned with a high-pressure cleaner?

A: it is most appropriate to use a high-pressure cleaner to clean the pollen and yellow sand that fly to cars, windows, balconies and other places. However, when pollen and yellow sand and rain are mixed and solidified, it needs to be wiped with sponges and brushes, so it is recommended to clean as soon as possible.

Q: the high pressure hose will not fall off. (the high pressure hose cannot be pulled out)

A: if the high pressure hose installed on the high pressure cleaner no longer falls off, turn off the power of the high pressure cleaner, turn off the faucet, hold the lever of the trigger gun, pull out the residual pressure in the pump, and loosen the lever.

If the residual pressure is not reduced, the high pressure hose cannot be pulled out.

Q: please tell me about the product warranty.

A: there should be an one-year warranty from the time of arrival of the goods. However, except for natural failures, it is not covered by the warranty.

◎リスク&チャレンジ※ ご支援の数が想定を上回った場合、製造工程上の都合等により、出荷時期が予定より遅れる場合がございます。※ 並行輸入品が流通する可能性があります。個人輸入及び販路によっては防ぐことができない可能性がある点、あらかじめご了承のほどお願い申し上げます。※ご⽀援後のご⽀援者様都合によるキャンセルや返⾦は受付いたしませんが、リターン配送予定日から1ヶ月を超えた場合には、希望者に限りキャンセルにて対応させていただきます。

In the nature of crowdfunding, on the basis of the above attention, on the basis of prior understanding and understanding, please support and take care of.